The technical advantages of the magnetostrictive level gauge: the magnetostrictive level gauge is suitable for high-precision clean liquid level measurement, with an accuracy of 1mm. Magnetostrictive liquid level gauges can also be used to measure the interface between two different liquids. Explosion-proof design, suitable for dangerous occasions, intelligent electronic circuit design can calculate the volume; the only movable part is a float, which is low maintenance.
Intelligent signal recognition algorithm, maintenance-free (no need to set threshold)
High precision: ±0.075%FS, or ±1.0mm (whichever is greater)
Highlight backlit LCD display signal waveform, visual diagnosis
Can measure liquid level and boundary at the same time, and output two 4~20mA currents at the same time
The maximum pressure is 26MPa, the standard is 11MPa
Temperature range: -196~427 degrees
Electronic modules can be replaced and upgraded on site
Built-in RFI/EMI EMC module
Optional HART or Modbus communication
Certification
Liquid level and boundary level measurement: hard rod 300mm~4000mm
Flexible cable 300mm~18000mm
Measurement accuracy: ±0.075%FS, or ±1.0mm (whichever is greater)
Medium density: 0.48~1.2g/cm3
Difference of boundary density: ≥0.05g/cm3
Working pressure: -0.05~26MPa
Power supply voltage: 12V~32V DC;
Output signal: Two-wire 4~20mADC (HART optional)
Four-wire RS485-MODBUS-RTU
Ambient temperature: -40℃~+70℃ (when ≤-20℃, the LCD has no display)
Explosion-proof mark: Intrinsically safe Exia IIC T1~T6 Ga
Flameproof Exd IIC T1~T6 Gb
Dust explosion-proof Ex tD A21 IP66 T400℃~ T80℃
Surge (impact) immunity: 1KV line to line, 2KV line to ground
Protection level: IP66