Pure electronic component sensor, anti-shock, anti-vibration, high reliability
Using flexible circuit board, the sensor can be transported
Can be used for remote measurement of magnetic flap
The upper part is negligible
Measure liquid level and interface at the same time, two-way isolated 4~20mA output
Liquid level and boundary level measurement: hard rod 300mm~4000mm; soft cable 3000mm~20000mm
Working pressure: -0.05~4Mpa
Measurement accuracy: ±5mm, ±10mm, or 0.2% (whichever is greater)
Medium temperature: -40℃~+125℃
Medium density: 0.3~2.0g/cm3
Difference of boundary density: ≥0.05g/cm3
Wetted material: 304, 316, Ti, HC or FEP
Power supply voltage: 12V~32V DC;
Output signal: Two-wire 4~20mADC (HART optional)
Four-wire RS485-MODBUS-RTU
Ambient temperature: -40℃~+70℃ (when ≤-20℃, the LCD has no display)
Surge (impact) immunity: 1KV line to line, 2KV line to ground
Protection level: IP66
It can be used to measure the liquid level/boundary level in the open or pressure vessel during the production process, or to measure the liquid level of sewage treatment, buried oil tanks and high-rise water tanks. It can also be used as a remote magnetic flap level gauge. Transmission out.
Address: 700 meters to the north of the Beifang the villagers committee，Yancun town, FangShan District, Beijing / Tel:0086-10-81522280/84858894/81522236
Fox:0086-10-84859894 / Web: Http://vuyvmckszb.xyz / E-mail:cbmaster@163.com